ONWA Digital Electronic Compass with GPS

£329.00

Exc VAT

ONWA KEC-30G(MK2)

Compass display and 9-Axis Electronic Compass with built-in High Accuracy GPS Module.

  • Low cost solution, High Accuracy Digital Compass
  • KEC30G(MK2) also provides GPS information, Lon/Lat, SOG and COG
  • Supplied with High Accuracy Onwa Marine Heading Sensor KA-GC9A
  • Can also be used with KA-GC05 or Hemisphere GPS Compass(V102 or V104s)
  • Can Correct Magnetic Deviation Manually or Automatically
  • Selectable output baud rate and intervals for heading information (HDT, HDM or HDG)
  • Output of GPS and heading signal can be interfaced with other equipment on board.
  • Waterproof and robust heading sensor suitable for outdoor marine condition.

Technical Info

HEADING Sensor 

KEC30

Hemisphere GPS Compass(V102 or V104s)or Hemisphere GPS Compass(V102 or V104s)

OUTPUT/INPUT(IEC61162-1) 

INPUT
2 x NMEA0183
a) Input sentences : GGA, GLL, GMS, GNS, GSA, GSV, RMC, VTG, HDT
b) Baudrate : auto scan up to 38400
c) Support heading/GPS sensor : KA-GC05, KA-GC9A and Hemisphere GPS Compass (V102 and V104s)
OUTPUT
2 x NMEA0183
Port 1 and Port 2(RS232) :
a) Output sentences : HDT, HDM and HDG (selectable) and RMC, GSA, GGA, VTG, ZDA (Fixed)
b) Heading Output interval selections : 25ms, 100ms, 200ms (default) and 1,000ms
c) Output baudrate selections : 4800 (default), 9600, 19200 and 38400 (selectable)

Environmental Conditions 

Ambient Temperature
Display unit : -15 °C to +55 °C
Heading/GPS sensor unit : -25 °C to +70 °C (for KA-GC05 and KA-GC9A)
Humidity
93% ±3% on 40 °C
Waterproofing
Display unit : IPX5
Heading/GPS sensor unit : IPX7 (for KA-GC05 and KA-GC9A)

Power Supply 

ELECTRICAL
10.5 – 40VDC
Protection
over-current, over-voltage, power transient and accidental reverse polarity protection.

2 in stock (can be backordered)